Saat baterai Anda beroperasi pada 24V–48V, tegangan sel tidak stabil, debit berlebihan, arus berlebihan, dan kenaikan suhu dapat memperpendek masa pakai baterai atau menimbulkan risiko keselamatan. Sebuah dipilih dengan benar BMS Baterai Litium membantu Anda memantau dan melindungi setiap unit baterai selama pengisian dan pengosongan. BMS Li-ion Maxkgo 8S-14S 30A memberikan perlindungan untuk 8S, 10S, 12S, dan konfigurasi litium-ion 14S, dengan arus pelepasan kontinu 30A dan penyeimbang sel bawaan. Untuk e-sepeda, skateboard listrik, robotika, Platform AGV/AMR, dan paket baterai khusus, Anda dapat menggunakan BMS perangkat keras ini sebagai solusi perlindungan baterai yang ringkas.
Apa yang Disediakan BMS Baterai Lithium Ini?
Sistem manajemen baterai perlu melakukan lebih dari sekadar melepas baterai saat kondisi tidak normal. Anda memerlukan fungsi perlindungan yang merespons pengisian daya, pemakaian, saat ini, suhu, dan kondisi tegangan sel.
BMS Baterai Lithium Maxkgo mengintegrasikan beberapa fungsi perlindungan pada satu PCB kompak:
- Overcharge protection for excessive charging voltage
- Over-discharge protection to reduce deep-discharge risk
- Over-current protection for excessive discharge current
- Short-circuit protection with a 300μs detection delay
- Temperature protection during battery operation
- Cell balancing with a 42±5mA balance current
- Low power consumption below 35μA during normal operation
- Sleep consumption below 10μA
This combination makes the board suitable when you need a practical Li-ion battery protection board rather than a software-heavy smart BMS architecture.
8S-14S BMS Supports Multiple Battery Configurations
Battery pack configuration directly affects your BMS selection. Instead of using separate boards for each configuration, this 8S-14S BMS supports four common Li-ion configurations.
| Konfigurasi | Typical System Voltage | Maxkgo BMS Support | Example Application |
|---|---|---|---|
| 8S | 24V class | ✓ | Compact mobility equipment |
| 10S | 36V class | ✓ | E-bike and DIY battery packs |
| 12S | 44V class | ✓ | Electric mobility and robotics |
| 14S | 48V class | ✓ | E-bike and higher-voltage systems |
The board supports a rated voltage range of 24V–48V, while the charging voltage follows the number of cells multiplied by 4.2V. Therefore, you should select the correct cell configuration and verify the battery pack design before installation.
30A Li-ion BMS for E-Bike and Robotics
If your application requires continuous discharge up to 30A, the Maxkgo board provides a suitable hardware protection platform. Its 30A continuous discharge current, ≤15mΩ internal resistance, and compact 47.6 × 32 × 9.2mm PCB help you integrate battery protection into space-constrained equipment.
You can consider this BMS for:
- E-bike battery packs
- Electric skateboard battery systems
- Platform robotika
- AGV and AMR battery applications
- Sistem tenaga portabel
- DIY Li-ion battery packs
- Custom energy storage projects
- RC and hobby battery systems
For an e-bike, Misalnya, you can use a 10S or 14S configuration depending on the battery design. For robotics or AGV applications, the 8S–14S flexibility allows you to select a configuration that matches your system voltage.

How to Select the Right Lithium Battery Protection Board
Before purchasing or installing a BMS for your battery pack, check these parameters in sequence:
- Confirm the battery chemistry — This board is designed for Li-ion batteries.
- Count the series cells — Select 8S, 10S, 12S, or 14S according to your pack configuration.
- Check the system voltage — The supported range is 24V–48V.
- Confirm discharge requirements — Continuous discharge current is rated at 30A.
- Check charging requirements — Charging current is specified at ≤10A.
- Verify balancing requirements — The board provides a 42±5mA balance current.
- Check installation space — PCB dimensions are 47.6 × 32 × 9.2mm.
- Match the protection functions — Confirm overcharge, debit berlebihan, arus berlebih, hubungan arus pendek, and temperature protection meet your battery design requirements.
Following these steps helps you avoid selecting a BMS based only on nominal battery voltage.
Why Choose Maxkgo for Hardware BMS Solutions?
MAXKGO, belonging to Dongguan Daqianjin Technology Co., Ltd., originated from the FLIPSKY team in 2017 and established the MAXKGO brand in 2021. The team developed its experience in electronic control through electric skateboard applications before focusing on high-voltage, high-current BMS technology.
MAXKGO states that its product development emphasizes R&D, quality control, dan pengujian dunia nyata. Its product portfolio now covers Hardware BMS, BMS yang cerdas, Hanya Mengisi BMS, BMS Budak Master Cerdas, BMS accessories, and drone ESC products.
The company also provides manufacturing and inspection facilities, along with documented certificates displayed on its official company materials. For commercial projects, you should request the applicable certificate, test report, wiring information, and protection parameters for your specific BMS configuration before production deployment.
Pertanyaan Umum
1. What battery configurations does this BMS support?
This Maxkgo BMS supports 8S, 10S, 12S, and 14S Li-ion battery packs, covering a 24V–48V class system range.
2. Is this a 30A BMS for e-bike batteries?
Ya. The board provides a 30A continuous discharge current and supports applications including e-bike battery packs, skateboard listrik, robotika, and custom lithium battery systems.
3. Does the BMS provide cell balancing?
Ya. The board includes a cell balancing function with a specified 42±5mA balance current and a 4.15±0.025V balance voltage.
Kesimpulan
Memilih yang benar BMS Baterai Litium requires you to match battery chemistry, series-cell configuration, voltase, saat ini, balancing requirements, and physical dimensions. The Maxkgo 8S-14S 30A Li-ion BMS combines support for four battery configurations with overcharge, debit berlebihan, arus berlebih, hubungan arus pendek, perlindungan suhu, and cell balancing in a compact PCB.
CTA
If you are developing an e-bike, electric skateboard, robotika, AGV/AMR, or custom Li-ion battery pack, contact Maxkgo with your cell configuration, nominal voltage, arus pengisian, continuous discharge current, and battery application. The technical team can help you confirm whether this 8S-14S BMS matches your battery design and provide the relevant wiring and technical specifications before you proceed.