blog

4S-30S Hanya Mengisi BMS dengan Pengisian 20A

hanya mengisi daya sistem manajemen baterai

Saat Anda memerlukan pengisian daya terkontrol untuk paket baterai lithium-ion multisel, an Hanya Mengisi BMS can solve a specific problem: protecting the pack during charging without adding discharge-control functions you do not need. MAXKGO’s 4S-30S 20A board supports lithium-ion packs from 4S to 30S, provides up to 20A charging current, and uses passive cell balancing. It also adds overcharge and overtemperature protection, while LED indicators help you monitor balancing activity. With an XT60 charging connector and a compact 130 × 30 × 11 mm design, this board fits applications where charging protection and space efficiency matter.

Why Choose an Only Charge BMS?

A charging protection board is not the same as a full battery management system designed to control both charging and discharging. If your battery architecture already has a separate discharge protection strategy, a charge-only design can provide a more focused solution.

Papan MAXKGO dirancang khusus untuk perlindungan pengisian daya. Anda dapat menggunakannya dengan baterai Li-ion yang kompatibel tanpa konfigurasi, sedangkan rangkaian penyeimbang pasif membantu mengatur perbedaan tegangan sel selama pengisian daya.

Fungsi utama meliputi:

  • 4Kompatibilitas seri S-30S
  • 20Arus pengisian maksimum
  • Penyeimbangan pasif pada 4.2V
  • 20–30mA menyeimbangkan arus pada 4.2V
  • Perlindungan overcharge pada 4.25V
  • Reset pengisian berlebih pada 4.19V
  • Perlindungan suhu berlebih pada 60°C
  • Reset suhu berlebih pada 40°C
  • Indikasi LED untuk penyeimbangan sel
  • Koneksi pengisian daya XT60
  • Casing heatsink aluminium anodisasi yang ringkas

4Spesifikasi dan Perlindungan BMS S-30S

Jika Anda memilih BMS 4S-30S, rentang voltase dan perilaku pengisian daya harus sesuai dengan konfigurasi baterai Anda. This MAXKGO model is designed for Li-ion cells with a nominal voltage of 3.7V per cell and supports configurations from 4S through 30S.

At the upper end, a fully charged 30S pack can exceed 127.5V DC. Therefore, you should treat wiring and installation as a high-voltage task and follow the specified B0-B15 and B16-B30 wiring sequence carefully.

Fitur MAXKGO 4S-30S Only Charge BMS Typical Full BMS
Main purpose Charging protection Charge + discharge management
Series range 4S-30S Depends on model
Charging current 20A Depends on model
Discharge protection Not supported Usually supported
Balancing Passive Active or passive
Balance current 20-30mA Depends on model
Balance indication LED Depends on model
Konektor XT60 Depends on model
Konfigurasi No configuration required May require configuration

This distinction is important. Do not discharge the battery through this protection board, because it does not provide overcurrent discharge, tegangan rendah, internal short-circuit, or pack overtemperature protection.

hanya mengisi daya papan BMS

How to Use a 20A Charging BMS Safely

For a 20A charging BMS, correct wiring is just as important as the electrical specifications. You can follow these basic steps:

  1. Konfirmasikan konfigurasi baterai. Make sure your Li-ion pack falls within the supported 4S-30S range.
  2. Check cell voltage sequence. Verify that the voltage increases correctly from the B0 connection through the required balance connections.
  3. Connect the protection wiring. Follow the supplied GH2.0 and HY2.0 cable configuration rather than changing the wiring order.
  4. Connect the charging cable. Use the supplied XT60 charging cable and confirm polarity before applying power.
  5. Monitor balancing indicators. Check the LED indicators during charging to verify balancing activity.
  6. Keep discharge separate. Jangan menyalurkan arus pengosongan baterai melalui papan khusus pengisian daya ini.
  7. Lakukan tes terkontrol. Periksa suhu pengisian daya, tegangan sel, dan perilaku perlindungan sebelum baterai diservis secara rutin.

Dimana Anda Dapat Menggunakan BMS Hanya dengan Biaya?

Desainnya yang ringkas membuat board ini cocok untuk sistem baterai yang memerlukan perlindungan pengisian daya khusus. Misalnya, Anda dapat mempertimbangkannya untuk skateboard listrik, skateboard listrik roda satu, skuter listrik, sepeda listrik, dan EUC, asalkan konfigurasi baterai dan desain kelistrikannya kompatibel.

Untuk skateboard listrik DIY, misalnya, Anda dapat menggunakan papan sebagai bagian dari arsitektur pengisian daya sambil memisahkan manajemen pelepasan propulsi. This approach is particularly relevant when you are building or modifying a high-voltage battery system and want the charging function isolated from the discharge path.

MAXKGO brings experience from the electric skateboard and electronic control sector to its BMS development. The brand originated from the FLIPSKY team in 2017 and officially established MAXKGO in 2021 to focus on high-voltage, high-current BMS technology. Its manufacturing process includes assembly, inspeksi, testing, dan kontrol kualitas, while the company also presents certificate documentation and factory information for customer review.

Pertanyaan Umum

1. What is an Only Charge BMS?

An Only Charge BMS is a battery protection board designed specifically for charging-related protection and balancing. Unlike a full BMS, it does not provide discharge protection.

2. Can this BMS support a 30S lithium-ion battery?

Ya. The MAXKGO model supports 4S to 30S Li-ion battery configurations. Namun, a fully charged 30S pack can exceed 127.5V DC, so you must follow high-voltage safety and wiring requirements.

3. Can I discharge through this BMS?

TIDAK. This model is designed for charging only. You should not discharge through the board because it does not provide overcurrent discharge, tegangan rendah, internal short-circuit, or pack overtemperature protection.

Kesimpulan

If you need a dedicated Hanya Mengisi BMS for a 4S-30S Li-ion battery pack, MAXKGO provides a focused charging-protection solution with 20A charging capability, keseimbangan pasif, LED balance indication, perlindungan harga yang berlebihan, overtemperature protection, and an XT60 connector. Before purchasing, confirm your battery series count, arus pengisian, wiring configuration, and separate discharge protection requirements.

CTA

Kontak MAXKGO to confirm whether the 4S-30S 20A board matches your battery configuration. For technical evaluation, provide your cell chemistry, jumlah seri, tegangan/arus pengisi daya, dan aplikasi yang dimaksudkan sehingga tim dapat membantu Anda memilih solusi PASI yang tepat.

Posting Terkait